OA Purifying
Ability |
OA Purifying Temp. and Humi. Control Contaminations isolation AMC Removal Particular Filter Application Smart ESCO Control |
Characteristics |
1.Pre-Air Washer (Particle Removal) |
2.Bio Filter (90% Virus & Bacteria Suppression) |
3.Pre-cooling (hot) Coil (AMC Removal Elevating) |
4.AMC Air Washer (>90% Water-soluble AMC Removal) |
5. Pre-cooling Coil |
6. Re-Heating Coil |
7.MAU Fan |
8.Chemical Filter (VOC &MA/MB Removal) |
9.HEPA Filter(99.97%@0.3um Particle) |
Item | Spray / Nozzle Type Air-washer | High-adsorption Clean Air-washer |
Water Rate | 1,167lpm-4.0Kg/cm2 | 170lpm-1.0Kg/cm2 |
Pump Power(HP) | 25 | 1 |
Drain(Ton-Day) | 6 | 6 |
AMC Eff. | NH4+ > 90%@ < 5ppbv | NH4+ > 90%@ < 3ppbv |
Pressure Loss | 80~100Pa | 40~80Pa |
Specific surface area(m2/m3) | 115 | 400 |
Iron outgassing | NO | NO |
Installation Cost(set/ratio) | 88% | 100% |
Power Running Cost (ratio) | 100% | 4% |
Advantage | 1.Lower expense of setting up than high-adsorption Clean washer. 2.Stainless steel Packing will not be a Amine clogged status happened. | 1.The air is passed through wet-modal in long time, and provides perfect humidifying. 2.It is air contact area of water bigger than Nozzle type Air-washer, and removing AMC better than Pump-system. 3.low liquid-gas ratio, no pump with water circle, and low expense of operation. |
Disadvantage | 1.Nozzle with the high-pressure forms water ring, so pump is high electric power and expense of operation. 2.Nozzle be a Amine clogged status will decrease removal efficiency. | 1.The set cost is higher than Nozzle Type system. 2.Ion adsorption pad could be Amine clogged status. |